在 ISDN 数据连接对话框的拨入连接选项卡中,可以定义是否以及如何通过 ISDN 路由器或通过装有 ISDN 卡的计算机拨入摄像机。
要管理用于拨出的 ISDN 连接,请单击拨出连接选项卡;某些用于拨出的参数(“拨号暂停”、“拨出限制”)可在拨出参数选项卡中配置。参数 | 说明 | ||
---|---|---|---|
ISDN 拨入 | 使用此选项可以启用或禁用通过 ISDN 拨入。如果已经定义设置,则即使禁用拨入,也会保存这些设置。 | ||
终端重启 |
如果激活此选项,摄像机将在连接终止后重启。 建议不要将此功能与通过以太网接口的网络连接同时使用,如果您预期短时间内有许多 ISDN 连接,也不要使用此功能。 出厂默认设置禁用此功能。 |
||
摄像机 MSN |
MSN (Multiple Subscriber Number,多用户号码)是用于呼叫摄像机的电话号码。根据出厂默认设置,摄像机将会对 ISDN 端口的每个 MSN 响应。 设置您希望摄像机响应的 MSN:
|
||
允许的电话号码 |
可将摄像机配置为只响应来自被认可的电话号码的呼叫。 要创建认可的电话号码列表,请在文本框中输入号码,每行一个。
如果将此列表留空,摄像机将会应答每个呼叫号码。 |
||
摄像机 IP 地址 |
摄像机在 ISDN 拨入连接时使用此 IP 地址。它可能与网络接口的 IP 地址不同。除非有合理的原因,否则请勿更改 ISDN IP 地址。 按出厂默认设置,ISDN IP 地址与网络接口的 IP 地址相同。 |
||
呼叫方 IP 地址 |
此 IP 地址分配给通过 ISDN 拨入摄像机的计算机。通常,无需在此输入内容,因为摄像机会自动以呼叫方 IP 地址加二作为 IP 地址。
如果要在此处输入 IP 地址,请确定此地址尚未分配给本地网络中的其它设备。呼叫方 IP 地址必须与摄像机 IP 地址不同。 |
||
闲置时间 | 为了将电话费降至最低,如果摄像机在此时间内未检测任何数据流量,会自动终止 ISDN 连接。 | ||
身份验证 |
建议您选择一个身份验证协议。大多数计算机都能理解两个协议。与 PAP 不同,CHAP 传输加密的用户名和密码信息。
|
||
摄像机登录 |
要想成功登录到摄像机,必须输入用户名和密码以进行身份验证。
|
参数 | 说明 |
---|---|
默认路由 | 如果激活了“ISDN 拨入”,便可在此对话框中设置此连接的默认路由(如果尚未配置的话)。 |
Click on the Set button to activate your settings and to save them until the next reboot of the camera.
Click on the Factory button to load the factory defaults for this dialog (this button may not be present in all dialogs).
Click on the Restore button to undo your most recent changes that have not been stored in the camera permanently.
Click on the Close button to close the dialog. While closing the dialog, the system checks the entire configuration for changes. If changes are detected, you will be asked if you would like to store the entire configuration permanently.
Per attivare queste impostazioni è necessario memorizzare la configurazione e riavviare la videocamera!
cn, de, en, es, fr, it, jp, ru |